Business Type : Manufacturer, Exporter, Supplier, Retailer
|Capacity||15 Bales per Hour|
|Saw||16in Dia, 161 Saw Blades, 615 Rpm|
|Doffing Brush||15 Inch Dia, 20 Rows of Brushes, 1552 Rpm|
|Seed Roll Box||5 Inch Steel Tube Rotates At 270 Rpm, 4 Inch Conveyor Rotates At 854rpm|
|Gin Motor||(Not included with machine) 150hp,1800 rpm, 60Hz|
|Length (front, with Covers)||(3873mm) 152-1/2 in|
|Height (floor to Bottom of Feeder)||(1343mm) 52-7/8 in|
|Width (with Covers)||(2330mm) 91-3/4 in|
|Saw Shaft Centerline to Floor||(730mm) 28-3/4 in|
|Weight (approximate)||(3175kg) 7000 lb|
Preferred Buyer From
|Location||Anywhere in India|
Featuring scientifically designed saw teeth, tempered for superstrength. The design creates less friction at the ginning point. Saws are of standard gauge and are precision ground.
Flow of Cotton
Lint is pulled and separated from the cotton seed by the gin saw rotating between ginning ribs. The saw teeth carry the lint through the evenly spaced ginning ribs at the ginning point and the seed is left behind in the roll box. The saw consists of 161 saw blades mounted on a journal that rotates at 615 RPM.
The saw blades have 330
Teeth and are 16 inches in diameter. Approximately 50 percent of the seed passes through holes in the patented seed tube located in the center of the roll box where they are conveyed to the ends of the gin and discharged to the seed conveyor below the gin. The remaining seed is purged from the bottom of the seed roll and falls into the seed conveyor. Lint is removed from the saw by the doffing brush.
Jet lint cleaner efficiency. Positive wiper action. No trash return. Moting can be regulated as cotton conditions dictate.
Positive Brush Doffing
Lint is removed directly from the gin saws at super-capacities producing a smooth sample. Features positive lint discharge and adjustable air intake.
Stainless Steel Roll Box
Featuring self-motivated seed roll, uniform saw tooth loading, high-capacity seed discharged and automatic feed.
Seed Roll Conveyor Tube
(Removes ginning seed from the center of the seed roll) This exclusive 5″ diameter louvered design rapidly removes seed. Speed of rotation is coordinated with the natural rotation of the seed roll for effective, positive results. Sealed bearing throughout.
Top Mounted Ginning Ribs
Engineered for safety and high performance, featuring super-strength at the ginning point. Cantilever rib design for tag relief.