Hi! Simply click below and type your query.
Our experts will reply you very soon.
Leading Manufacturers, Exporters, Wholesaler, Retailer of 161 Saw Gin, 2000 Extractor Saw Gin, 201 Saw Gin, 24-D Lint Cleaner, 40 Saw Gin, Air Lock, Air Separator, Air Separators, Battery Condenser, Bucket Elevator, Centrifugal Lint Cleaner, Cotton Bale Wire Ties, Cotton Boll Opener, Cotton Ginning Machine Magnum Model, Cotton Ginning Machine Platina Models, Cotton Ginning Machine Tejas Model, Cotton Module Feeding System, Down Packing Cotton Baling Press, DOWN PACKING COTTON BALING PRESS 9500 MODEL, Fully Automatic Ginning Plant, Ginning Machine Auto Feeder and Impact Cleaner from Nagpur.
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Capacity | 15 Bales per Hour |
Saw | 16in Dia, 161 Saw Blades, 615 Rpm |
Doffing Brush | 15 Inch Dia, 20 Rows of Brushes, 1552 Rpm |
Seed Roll Box | 5 Inch Steel Tube Rotates At 270 Rpm, 4 Inch Conveyor Rotates At 854rpm |
Gin Motor | (Not included with machine) 150hp,1800 rpm, 60Hz |
Length (front, with Covers) | (3873mm) 152-1/2 in |
Height (floor to Bottom of Feeder) | (1343mm) 52-7/8 in |
Width (with Covers) | (2330mm) 91-3/4 in |
Saw Shaft Centerline to Floor | (730mm) 28-3/4 in |
Weight (approximate) | (3175kg) 7000 lb |
![]() |
Preferred Buyer From
Location | Worldwide |
Featuring scientifically designed saw teeth, tempered for superstrength. The design creates less friction at the ginning point. Saws are of standard gauge and are precision ground.
Flow of Cotton
Lint is pulled and separated from the cotton seed by the gin saw rotating between ginning ribs. The saw teeth carry the lint through the evenly spaced ginning ribs at the ginning point and the seed is left behind in the roll box. The saw consists of 161 saw blades mounted on a journal that rotates at 615 RPM.
The saw blades have 330
Teeth and are 16 inches in diameter. Approximately 50 percent of the seed passes through holes in the patented seed tube located in the center of the roll box where they are conveyed to the ends of the gin and discharged to the seed conveyor below the gin. The remaining seed is purged from the bottom of the seed roll and falls into the seed conveyor. Lint is removed from the saw by the doffing brush.
Overhead Moting
Jet lint cleaner efficiency. Positive wiper action. No trash return. Moting can be regulated as cotton conditions dictate.
Positive Brush Doffing
Lint is removed directly from the gin saws at super-capacities producing a smooth sample. Features positive lint discharge and adjustable air intake.
Stainless Steel Roll Box
Featuring self-motivated seed roll, uniform saw tooth loading, high-capacity seed discharged and automatic feed.
Seed Roll Conveyor Tube
(Removes ginning seed from the center of the seed roll) This exclusive 5″ diameter louvered design rapidly removes seed. Speed of rotation is coordinated with the natural rotation of the seed roll for effective, positive results. Sealed bearing throughout.
Top Mounted Ginning Ribs
Engineered for safety and high performance, featuring super-strength at the ginning point. Cantilever rib design for tag relief.
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Feeder Motor (not Included with Machlne)….15 Hp, 1800 Rpm (60 Cycle) | 15 Hp, 1500 Rpm (50 Cycle) or No Motor Used When Driven from the Gin Saw Shaft |
Feed Roller Motor | 3/4 HP, 1800 RPM, 230/460 Volt, 3-phase 60Hz TEFC Frame, 56C (wire for 230 volt) |
Four Spiked Cylinders | 11” Diameter (279.4 Mm) |
Two Channel Saw Cylinders | 16-1/2” Diameter (419.1 Mm) |
One Saw Dotter Cylinder | 11-5/8” Diameter (295.2 Mm) |
Two Feed Cylinders | 5-3/4” Diameter (146 Mm) |
Length Inside | 96” (2438 mm) |
Overall with Covers Height Cover Top to Bottom | 6’ 3-7/8” (1952.6 mm) |
Top of Cover to Bottom of Head Height | 9’ 1/4” (2749.5 mm) |
Width Front of Touch Screen to Back | 7’ 7/8” (2155.8 mm) |
Approximate (without guards)Weight | 7,340 lbs (3329.4 kg) |
Preferred Buyer From
Location | Worldwide |
The 2000 extractor/feeder is the economical design for fine trash removal and single locking of seed cotton fed into a gin stand. The 2000 extractor/feeder has shown excellent feeding and trash removal in field tests and in cotton High Volume Instrument testing. The model 2000’s one piece unit design will fit under most existing conveyors and in the same mounting footprint as most gin stand models. Replacement of your old feeder or any new installation with the 2000 extractor/ feeder will ensure the most economical way to feed your gin stand.
A touch screen control panel, mounted on the feeder, is used for display and changing PLC
control parameters. This panel contains several touch screen displays to control every aspect of 2000 EXTRACTOR / FEEDER BAJAJ MODEL BAJAJ STEEL INDUSTRIES LTD. S I N C E 1 8 3 2 IN COLLABORATION WITH , USA Shown mounted over the Bajaj 161 Saw gin with metal guards and Polycarbonale Windows FOUR SPIKED CLEANING CYLINDERS FIVE ADJUSTABLE CLEANING GRIDS SEGMENTED HEADS FOR CYLINDER REMOVAL POLYCARBONATE GUARD WINDOWS POLYCARBONATE LINT SLIDE COVER the ginning operation. A touch screen display. with adjustable setpoints, controls capacity of ginning based upon current load on the gin motor, An AC inverter drives the 3/4 hp feed motor for ease of control and operation, The gin and feeder operations are synchronized to prevent over feeding or under feeding. Motion detectors on the feeder and lint cleaner auto¬matically stop the ginning operation if the cotton flow is interrupted. *not included
As seed cotton enters the 200, feeder through two 6 vane feed rollers, it is first exposed to four spiked cleaning cylinders. The cotton is passed over the top of these cylinders and is then conveyed between them and the inclined grid section which allows for improved fine trash removal and single locking.
Once through the inclined grid two section, cotton is carried to two 6-1/2” channel saw cylinders, one of which functions as a reclaimer. The flow of cotton through a combination of brushes, a control bar, and adjustable grid sections allows tor hull, stick. and fine trash removal and enhances the opening of seed cotton locks for improved ginning. A saw dotter cylinder improves single locking and transfers the seed cotton from the cleaning cylinders to the feeder apron and into the gin.
Features :
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Capacity | 25 Bales Plus per Hour |
Saw | 16″ (406mm) Dia 201 Saw Blades, 615 RPM |
Doffing Brush | 15 (381mm) Dia. 20 Rows of Brushes, 1552 Rpm |
Seed Roll Tube | Independent Drive 5″ (127mm) Steel Tube Rotates At 270 Rpm, 4′ (101.6mm) Conveyor Rotates At 854 Rpm |
Gin Motor | (Not Included with Machine) 250 HP |
Picker Roller | Independent Drive 350 Rpm |
Length (front, with covers) | (4470 mm) 176” |
Height (floor to Bottom) | (1343 mm) 52 7/8” of feeder) |
Width (with Covers) | (2383 mm) 93 13/16” |
Saw Shaft Centerline | (730 Mm) 28 3/4”to Floor |
Weight (approximate) | (3628 Kg) 8000 Lb |
![]() |
Preferred Buyer From
Location | Worldwide |
Product Details :
Flow of Cotton
Lint is pulled and separated from the cotton seed by the gin saw rotating between ginning ribs. The saw teeth carry the lint through the evenly spaced ginning ribs at the ginning point and the seed is left behind in the roll box. The saw consists of 201 saw blades mounted on a journal that rotates at 615 RPM. The saw blades have 330-teeth and are 16 inches (406mm) in diameter. Approximately 50 percent of the seed passes through holes in the seed tube located in the center of the roll box where they are conveyed to the ends of the gin and discharged to the seed conveyor below the gin. The remaining seed is purged from the bottom of the seed roll and falls into the seed conveyor. Lint is removed from the saw by the doffing brush.
Positive Brush Doffing
Lint is removed directly from the gin saws at super-capacities producing a smooth sample. Features positive lint discharge and adjustable air intake.
Lower Moting
Adjustable mote board allows for additional cleaning.
Optional Huller Ribs
Gin Frame supplied with rib rail for optional huller rib Use.
Stainless Steel Roll Box
Featuring selfforming seed roll, uniform saw tooth loading, high-capacity seed discharge and automatic feed.
Seed Roll Conveyor Tube
(removes ginned seed from the center of the seed roll) This exclusive 5″ (127mm) diameter
louvered design rapidly removes seed. Speed of rotation is coordinated with the natural rotation of the seed roll for effective, positive results. Sealed bearings throughout.
Top Mounted Ginning Ribs with Inserts
Engineered for safety and high performance, featuring super-strength at the ginning point. Cantilever rib design for tag relief.
16" Gin Saws
Featuring scientifically designed and heat tempered saw teeth The design creates less friction at the ginning point. Saws are of standard gauge and are preision ground, mounted on a 6 7/8″ {174.6 mm} diameter Saw Shaft with 4 7/16· (112.7 mm) Pillow Block Bearings.
Brush & Saw Removal
Segmented heads for easy front removal of gin saw and gin brush.
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
24-D Motor | 40hp, 1750 RPM |
Brush Cylinder | 17.75 In, Cylinder Dia, 1655 Rpm |
Saw Cylinder | 24.0 In, Cylinder Dia, 908 Rpm |
Condenser Drum | 24.0 in, cylinder dia, 27.51 rpm with Step Cone Sheave 5.0 |
Mote Air Requirement (Per Machine) | 4000 CFM |
Brush Air Requirement (Per Machine) | 7100 CFM |
Length Inside Heads | (2591mm) 102 in |
Length Outside of Closed Doors | (3721mm) 146-1/2 in |
Length Outside of Open Doors | (5182mm) 204 in |
Length Width (Outside of Covers) | (1626mm) 64 in |
Floor to top of Condenser | (2657mm) 104-5/8 in |
Floor to top Horizontal Duct | (3442mm) 135-1/2 in |
Condenser Weight | (1069kg) 2,400 lbs |
Lint Cleaner Base Weight | (3656kg) 8,060 lbs |
![]() |
Preferred Buyer From
Location | Worldwide |
The BAJAJ CONEAGLE 24-D Golden Eagle Lint Cleaner is a saw-type, controlled-batt lint cleaner having two main assemblies, the lint cleaner base and the condenser assembly mounted on top of the lint cleaner base. One optional three-phase AC motor powers all drives in the condenser and lint cleaner.
Major components of the condenser assembly consist of a 24-inch diameter perforated screen condenser drum and two grooved doffing rollers. Each end of the condenser drum is connected to an air duct. Air carrying cotton into the drum escapes out the air ducts while the cotton adheres to the drum. Adjustable flapper values
on the ducts provide air balance.
Major components of the lint cleaner base assembly consist of three feed rollers, a feed bar, eight cleaning grid bars, a saw cylinder and the doffing brush. Adjustments are provided for maintaining proper position of the components.
Single or Tandem
The BAJAJ CONEAGLE Golden Eagle 24-D’s are easily installed in single unit or tandem arrangements behind any gin stand and will more than meet every challenge. Valve configuration allows use of either, neither or both lint cleaners.
Flow of Cotton
Lint enters the condenser and is formed into a batt on the condenser screen. Air carrying the lint passes through the screen on the drum and exits out the two end ducts. The two grooved doffing rollers remove the batt from the condenser and direct it to feed rollers in the lint cleaner. The rear grooved doffing roller is installed with a minimum running clearance from the drum and allows the doffing rollers to form a pressure seat at the discharge point. The front doffing roller is set at 3/8 inch from the condenser drum. As the flow continues, the increased speed of the rollers draw and straighten fibers for the saw.
Rollers draw and direct the batt to the feed rollers and the feed bar which feeds the batt into the saw. The feed roller is under spring tension exerting a force toward the face of the feed bar. The feed roller and feed bar grip the batt so that the fibers are drawn and combed as they are placed on the surface of the saw.
Trash and mote particles thrown to the outside edge of the cotton by centrifugal force are stripped by the cleaning grid bars. The saw carries the cotton to the doffing point where it is removed by the brush. The brush also generates air flow to help convey the lint.
Super Capacity and Cleaning
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
24-D Motor | 40hp, 1750RPM |
Brush Cylinder | 17.75 in, Cylinder Dia, 1655 RPM |
Saw Cylinder | 24.0 In, Cylinder Dia, 908 RPM |
Condenser Drum | 24.0 in, cylinder dia, 27.51 rpm with Step Cone Sheave 5.0 |
Mote Air Requirement (Per Machine) | 4000 CFM |
Brush Air Requirement (Per Machine) | 7100 CFM |
Inside Heads | (2591mm) 102 in |
Outside of Closed Doors | (3721mm) 146-1/2 in |
Outside of Open Doors | (5182mm) 204 in |
Width (Outside of Covers) | (1626mm) 64 in |
Floor to top of Condenser | (2657mm) 104-5/8 in |
Floor to top Horizontal Duct | (3442mm) 135-1/2 in |
Condenser | (1069kg) 2,400 lbs |
Lint Cleaner Base | (3656kg) 8,060 lbs |
![]() |
Preferred Buyer From
Location | Worldwide |
Product Details :
Lint is pulled and separated from the cotton seed by the gin saw rotating between ginning ribs. The saw teeth carry the lint through the evenly spaced ginning ribs at the ginning point and the seed is left behind in the roll box. The saw consists of 40 saw blades mounted on a journal that rotates at 615 RPM
The saw blades have 330
Teeth and are 16 inches in diameter. The seed is purged from the bottom pf the seed roll and falls into the seed conveyor. Lint is removed from the saw by the doffing brush.
Overhead Moting
Jet lint cleaner efficiency. Positive wiper action. No trash return. Mounting can be regulated as cotton conditions dictate
Positive Brush Doffing
Lint is removed directly from the gin saws at super-capacities producing a smooth sample. Features positive lint discharge and adjustable air intake.
Super Capacity and Cleaning
Rugged, Trouble-Free Construction
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Preferred Buyer From
Location | Worldwide |
Salient Features :
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
![]() |
Preferred Buyer From
Location | Worldwide |
Salient Features :
MOQ : 1 Piece
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Finishing | Powder Coated |
Machine Weight | Customised |
Packaging Type | Customised |
Pressure | Customised |
Usage | Cotton Industry |
Specialities | Customised |
Dimension (LxWxH) | Customised |
Type | Air Separator |
Brand Name | Bajaj |
Material | Mild Steel |
Shape | Customised |
Certification | ISO 9001:2008 Certified |
Color | Tan |
Voltage | 380V |
Condition | New |
Power | Customised |
Driven Type | Hydraulic |
Connection Type | Customised |
Phase | Three Phase |
Warranty | 1 Year |
Country of Origin | India |
Corrosion Resistance | Yes |
Operating Type | Automatic |
Thickness | Customised |
Operating Temperature | Customised |
Frequency | Customised |
Production Capacity | 15 |
Accuracy | Customised |
After-Sales Service Provided | Yes |
Flow Rate | Customised |
Noise Level | Customised |
![]() |
|
Payment Terms | D/A |
Delivery Time | 7 Days |
Preferred Buyer From
Location | Worldwide |
To furnish the diverse requirements of our clients we are involved in manufacturing, supplying and exporting a wide range of Air Separator with Vacuum Wheel. These are manufactured using best quality material which we sourced from the trusted and reliable vendors of the market. These have spiked cleaning cylinders across individual round grid bars ensure gentle treatment and a free flow of seed - cotton through the machine, an adequate opening of cotton and removal of all fine trash including dust, sand, leaf, pepper, and pin before they get embedded in the cotton.
Features:
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Capacity / Hour (avg) | 5000 Kgs of Lint |
Power (Max) | 5 HP |
Height | 2100 mm |
Width | 2250 mm |
Length | 2180 mm |
Weight (approx) | 2000 Kg |
Drum Diameter | 40” |
Optional Accessories | I) VFD drive for 5HP motor, II) Panel for VFD |
![]() |
Preferred Buyer From
Location | Worldwide |
Features & Benefits :
MOQ : 1 Set
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Payment Terms | D/A |
Delivery Time | 30 Days |
Preferred Buyer From
Location | Worldwide |
Bajaj Bucket Elevators are ideally suited to elevate bulk materials from sluggish to free flowing vertically. These bucket elevators are manufactured for capacities up to 15000 Kg/hr. depending upon the material requirements. Bajaj Bucket Elevators consists of rectangular rigid mild steel housing with a tangential inlet in the bottom section and an inclined outlet in the top section. Bajaj Bucket Elevators are of centrifugal type with rigid seamless mild steel buckets mounted on open ended belts. These are anti static oil repellent in nature. The drive unit comprises of an electrical motor coupled to reduction gear box mounted on the maintenance platforms attached to the top section.
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Discharge Vaccum | 2 in. (51 mm) WGNEG Air |
Velocity | 12,000 Ft./min. (3658 M/min) |
Mote Opening | Variable, Set 1 Inch (25.4 Mm) At Factory |
Length Inside | 96 in. (2438 mm) |
Overall | 120 in. (3048 mm) |
Width | 62-1/8 in. (1578 mm) |
Height | 45-1/2 in. (1156 mm) |
Weight (approximate) | 2500 lb. (1134 kg) |
![]() |
Preferred Buyer From
Location | Worldwide |
The Centrifugal Lint Cleaner is a flow-through (air-jet type) lint cleaner. Ginned lint is conveyed by air into the cleaner through a constricting duct at a relatively high velocity.
Air and cotton moving through the inlet duct make an abrupt change in direction as they pass across an adjustable mote opening. The heavier trash is ejected through the operating by inertial forces while lint is carried through the cleaner by the airstream.
The amount of trash removed is controlled by the size of the adjustable mote opening. This opening can be adjusted during operation by a handwheel on the exterior of the machine. An external graduated scale having numbers 0 through 10 provides an adjustment reference point. Ejection of trash can be observed through a window on each end or through the door on the front. In the event of a tag forming in the constricting duct, a lever is provided on top of the cleaner to quickly move the mote opening to the full open position.
MOQ : 2 Set
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Wire Ties |
Material | Galvanised |
Thickness | Customised |
Length | Customised |
Application | Bales Tie |
Color | Silver |
Feature | Excellent Strength, Good Quality, High Griping, Rust Resistance, Weather Resistance |
Finishing | Polished |
Wire Gauge | Customised |
Country of Origin | India |
Payment Terms | D/A |
Delivery Time | 30 Days |
Preferred Buyer From
Location | Worldwide |
Features & Benefits :
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Cleaning Capacity / Hour(avg) | 600 Kgs Raw Cotton |
Connected Total Power | 5 HP |
Height from Top of Hopper | 5 1/4’ |
Height from Top of Cover | 4 1/4’ |
Width | 3 ½’ |
Length | 12’ |
Weight (approx) | 750 Kgs |
![]() |
Preferred Buyer From
Location | Worldwide |
Features & Benefits :
An additional profit machine :
Robust Construction :
Safe and Trouble free :
Optional Accessories
MOQ : 2 Set
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Roller Ginning Machines |
Certification | ISO 9001:2008 |
Application | Cotton cleaning |
Weight | Customised |
Color | Tan |
Voltage | 380V |
Condition | New |
Rated Power | Customised |
Automatic Grade | Automatic |
Driven Type | Electric |
Warranty | 1year |
Country of Origin | India |
M/C Bolt Centre | 1637x760 mm |
M/C Centre (min.) | 2637 mm |
Production capacity (Lint)* | 95 to 140 Kgs/Hr |
Processing Capacity (R/C) | 265 to 430 Kgs/Hr |
Electric Motor | 5 H.P. 132 M Frame |
Flat Length | 1521 mm |
Space b/w Row (min. c/c) | 3660 mm |
Operating Speed | 950 /1000 RPM |
Driving V-Belts | 2 Nos. ‘B’ Section |
Bearings (Need Lubrication) | 7 Nos. |
Bearings (Lubrication Free) | 14 Nos |
Lubrication (Grease) | 75 Gms/8 Hr |
Gears | Helical |
Seed Discharge | Slides / Vertical |
Removal of Cotton Lint | Front & Rear |
Min Distance B/w M/c | 1000 mm |
Rotation of Machine Pulley | Clockwise |
Autofeeder RPM | 35 - 40 |
Feeding System | Mechanical/ Pneumatic Manual |
Bearings | 14 |
Lubrication/(Grease) | 20 Gms/ 8 hrs |
Storage Capacity | 45-60 kgs |
![]() |
|
Payment Terms | D/A |
Delivery Time | 7 Days |
Preferred Buyer From
Location | Worldwide |
Highest out Turn of Lint than other Ginning System. Cleaner Seeds with minimum Cotton Linter on it.
We have been awarded the “Largest and modern cotton ginning & pressing machinery manufacturer in India” by the hands of then Hon’ble Union minister of textile Govt. of India Mr. Shankersinh Vaghela.
Why MAGNUM DR ?
Over 100,000 Bajaj Double Roller Ginning Machines are operating throughout India and various other countries like Bangladesh, Egypt, Indonesia, Kenya, Madagascar, Myanmar, Nepal, Nigeria, Peru, Shri Lanka, Tanzania, Uganda, Zambia, Zimbabwe etc.
BENEFITS
MOQ : 1 Piece
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Roller Ginning Machines |
Certification | ISO 9001:2008 |
Application | Cotton cleaning |
Weight | Customised |
Color | Tan |
Voltage | 380V |
Condition | New |
Rated Power | Customised |
Automatic Grade | Automatic |
Driven Type | Electric |
Warranty | 1year |
Country of Origin | India |
Size | 54″ |
M/C Bolt Centre | 1477 x 760 mm |
M/C Centre (min.) | 2357 mm |
Production Capacity (Lint)* | 75 to 110 Kgs/Hr |
Processing Capacity (R/C)* | 225 to 330 Kgs/Hr |
Electric Motor | 5 H.P. 132 S Frame |
Flat Length | 1361mm |
Space b/w Row (min. c/c) | 3350 mm |
Operating Speed | 950 / 1000 RPM |
Driving V-Belts | 2 Nos. ‘B’ Section |
Bearings (Need Lubrication) | 7 Nos. |
Bearings (Lubrication Free) | 14 Nos. |
Lubrication (Grease) | 20 Gms/8 Hrs |
Gears | Helical |
Seed Discharge | Slides / Vertical |
Removal of Cotton Lint | Front & Rear |
Min Distance B/w M/c | 880 mm |
Rotation of Machine Pulley | Clock Wise |
Autofeeder R.P.M. | 35 - 40 |
Feeding System | Mechanical / Pneumatic / Manual |
Autofeeder Bearings | 14 Nos |
Storage Capacity | 42 - 55 kg |
![]() |
|
Payment Terms | D/A |
Delivery Time | 7 Days |
Preferred Buyer From
Location | Worldwide |
Bajaj Double Roller Gin Machine - PLATINA, a New Generation model in 54' with Highest Strength and Highest Output in its range along with advanced Autofeeder having only three Greasing points with 50% lesser vibrations. Capable to Gin the maximum strength seed cotton upto 50 G/Tex with Lustrous Lint fiber production, uses less power consumption per unit of production.
MOQ : 1 Set
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Roller Ginning Machines |
Certification | ISO 9001:2008 |
Application | Roller Cutting |
Weight | Customised |
Color | Tan |
Voltage | 380V |
Condition | New |
Rated Power | Customised |
Automatic Grade | Automatic |
Driven Type | Electric |
Warranty | 1year |
Country of Origin | India |
M/C Bolt Centre | 1477x760mm |
M/C Centre (min) | 2357 mm |
Production Capacity( Lint) | 65 to 105 Kgs/Hr |
Processing Capacity (R/C) | 200 to 265 Kgs/Hr |
Electric Motor | 5 H.P 132 S Frame |
Flat Length | 1361 mm |
Space b/w Row (min c/c) | 3350mm |
Operating Speed | 950/1000 RPM |
Driving V-Belts | 2 Nos/B Section |
Bearings (Need Lubrication) | 5 Nos. |
Bearings (Lubrication Free) | 16 Nos. |
Lubrication (Grease) | 75 Gms/8 Hrs |
Gears | Helical |
Seed Discharge | Vertical |
Removal of Cotton Lint | Front & Rear |
Min Distance B/w M/c | 880 mm |
Rotation of Machine Pulley | Clock Wise |
Autofeeder R.P.M. | 35 - 40 |
Feeding System | Mechanical / Pneumatic / Manual |
Autofeeder Bearings | 10 Nos. (Lubrication Free), 4 Nos. (Need Lubrication) |
Autofeeder Lubrication (grease) | 20 Gms/8 Hrs |
Autofeeder Storage Capacity | 42 - 55 kg |
![]() |
|
Payment Terms | D/A |
Delivery Time | 30 Days |
Preferred Buyer From
Location | Worldwide |
Bajaj DR gins give highest out turn of lint with better seed quality at lowest maintenance and per unit cost of production. Highest out Turn of Lint than other Ginning Systems. Cleaner Seeds with minimum Cotton Linter on it.
Application areas:
Features:
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
![]() |
Preferred Buyer From
Location | Worldwide |
The Bajaj Module Feeder controls the volume of seed cotton conveyed dispersed and fed into the gin and is limited only by the maximum seed cotton feeding capacity of the gin machinery.
The dual drive system allows modules to be quickly conveyed to the dispersing section of the feeder. The conveyor feeding the disperser has a variable speed drive to coordinate the module flow with the capacity of the gin plant. Additional 36’ conveyor sections may be added to increase module storage capacity.
The Company manufactures moving floor feeders, moving head feeders, dump feeders, belt feeders and roller feeders and has been proven the best for feeding all types of module seed cotton into the ginning system.
The new customer requested cost saving Bajaj Module Feeder design features the same proven components of our Standard Module Feeder with only one section of walkways and no module side walls.
MOQ : 1 Set
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Cotton Baling Press |
Certification | ISO 9001:2008 |
Application | Cotton Pressing |
Weight | Customised |
Color | Tan |
Voltage | 380V |
Condition | New |
Automatic Grade | Automatic |
Power | Customised |
Driven Type | Hydraulic |
Warranty | 1year |
Type | Cotton Baling Press |
Country of Origin | India |
![]() |
|
Payment Terms | D/A |
Delivery Time | 30 Days |
Preferred Buyer From
Location | Worldwide |
Bajaj Steel is a leading company involved in manufacturing, supplying and exporting a wide range of Fully Automatic/Semi Automatic Down Packing Cotton Bailing Presses which has bailing capacity of 5,8,10,15,20,25,30,35,45 & 60 Bales Per Hour.
Application areas
Features
MOQ : 1 Set
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Certification | ISO 9001:2008 |
Weight | Customised |
Automatic Grade | Automatic |
Warranty | 1year |
Voltage | 380V |
Country of Origin | India |
Brand Name | Bajaj |
Application | Hydraulic |
Color | Tan |
Condition | New |
Power | Customised |
Driven Type | Customised |
Pressure | Customised |
After-Sales Service Provided | Yes |
Production Capacity | 2 |
Certificate | Yes |
Press (Complete)Weight | 89,300 lbs. (40506 Kgs.) |
Upper Beam Weight | 11,060 lbs. (5016 Kgs.) |
Lower Beam Weight | 15,900 lbs. (7211 Kgs. |
Upper Ram Weight | 2,900 lbs. (1315 Kgs.) |
Lower Ram Weight | 9,900 lbs. (4490 Kgs.) |
9300 Press “20”X41” | 11,900 lbs. (5490 Kgs.) 9300 Press |
Lower Box 9300 Press “20”X41” | 11,900 lbs. (5490 Kgs.) 9300 Press |
Lower Box “20X54” | 12,070 lbs. (5474 Kgs.) |
Upper Follower Block 9300 Press “20X41’” | 2,100 lbs. (954 Kgs.) |
9300 Press “20X54” | 2,330 lbs. (1057 Kgs.) |
End Column | 3,420 Lbs. (1551 Kgs.) |
Center Column Assembly | 3,450 lbs. (1565 Kgs.) |
Ram Casing | 5,715 lbs. (2592 Kgs.) |
Pusher | 2,840 lbs. (1288 Kgs.) |
Capacity | Maximum 80+ Bales per Hour (with Optional Equipment) |
Lower Ram | 18 In. Dia X 121 In. Stroke. Maximum Force Output Approximate 636 Tons |
Upper Ram | 12 In.bore X 8 1/2 In. Rod X 58 In. Stroke Maximum Force Output Approximate 200 Tons |
Tramper Cylinder | 6 In. Bore X 4 In. Rod X 132 in Working Stroke |
Pusher Cylinder | 2 ½ in Bore X 1 3/4 in Rod X 54 in Working Stroke. |
Belt Feeder Motor RPM | 360-400 |
Pump Displacement | 5.4 cu.in/rev. (88.5 cu./rev) |
![]() |
|
Payment Terms | D/A |
Delivery Time | 30 Days |
Preferred Buyer From
Location | Worldwide |
The BAJAJ CONEAGLE Model 9300 up-packing fiber bale press is capable of pressing 50 to 80 universal density bales per hour. The standard 9300 press has a capacity of 50 bales per hour with the standard 1200 gallon hydraulic pumping unit (305 connected HP) and one 20 gallon rotator/lock hydraulic pumping unit (15 HP). An additional 400 gallon Booster pumping unit (135 connected HP) is required to produce 60 bales per hour. When the 9300 press is equipped with an optional high speed pumping and tramping / Pusher system this press has consistently run at speeds of 75 to 80 + bales per hour.
An 18 inch diameter x 121 inch stroke lower ram and a 12 inch diameter x 44 inch stroke upper ram are used to compress the lint cotton into a universal density bale. The force output of the lower ram is approximately 636 tons (577 metric tons).The force output of the upper ram is approximately 200 tons (181 metric tons). The 9300 press is equipped with a hydraulic pusher and tramper. The hydraulic pusher feeds lint cotton into one press box and the hydraulic tramper vertically packs the cotton charge into the box at speeds of up to 20 strokes per minute. A hydraulic rotator motor rotates the press boxes 180 degrees for further packing of the lint cotton by the press rams into a universal density bale.
The 9300 press may be operated in an automatic or semi-automatic mode. In the automatic mode, the press operates fully automatic when an automatic bale tying device is used. If the press is used in a semiautomatic mode the press operator pushes the ram down button on the press console to initiate the bale eject sequence after manual bale tying is finished. Press operations are controlled by a Programmable Logic Controller (PLC) in the press console. The control console contains the control electronics, press systems monitoring indicators, and controls for all operations of the press.
Hydraulic power for operation of the Model 9300 is supplied by electric motor driven pumps installed on one or two reservoirs. The primary reservoir for the mid capacity presses holds 1200 gallons of hydraulic oil. The optional booster pump unit holds 400 gallons of hydraulic oil. Piston and vane pumps supply oil to hydraulic control blocks for distribution to the pusher/belt feed, tramper, upper and lower rams circuits.The main pumping units are interconnected in one hydraulic tank. The reservoirs have removable service doors located on the tank top. A visual oil level gauge is provided on each reservoir. The tank interiors are baffled and braced to separate intake ports from return ports. A separate gear pump with a dedicated oil reserve supplies oil to the rotator, and box unlock circuits. each pumping unit utilizes a dedicated filter/cooler pump that pumps oil through a screw-on type filter to either an oil/air or and oil/water cooler.
Main Press Pumping Unit : 1200 gallons (4540 liters)
Pump Motors : 100 Hp, 230/460 v, 3ph
#1 Press Booster : 100 Hp, 230/460 v, 3ph
Tramper / Pusher : 100 Hp, 230/460 v, 3ph
Pump / Filter Unit : 5.4 Hp, 230/460/380 v, 3ph ( 60 Hz Motors = 1800 rpm)
Pumps : Vane and Piston
Hydraulic Tank : 1200 gallons (4540 liters) removable top service doors
Booster Pumping Unit : 400 gallons (1513 liters)
Pump Motors : 100 Hp, 1800 rpm,230/460 v, 3ph
#2 Press Booster : 100 Hp, 230/460 v, 3ph
#2 Tramper Booster : 100 Hp, 230/460 v, 3ph
Pump/Filter Unit : 5.4 Hp, 230/460/380 v, 3ph ( 60 Hz Motors = 1800 rpm)
Pumps : Vane and Piston
Hydraulic Tank : 400 gallons (1513 liters) removable top service door
Rotator / Unlocking Pumping Unit
Hydraulic Tank : 20 gallons
Pump Motor : 15 hp, 230/460v, 3ph
Pump : 1.37 cu.in./rev (22.45 cu.cm./rev) Gear-Submerged
MOQ : 1 Set
Business Type | Manufacturer, Exporter, Supplier |
Type | Cotton Ginning Machine |
Certification | ISO 9001:2008 |
Application | Cotton Cleaning |
Weight | 100-1000kg |
Color | Tan |
Voltage | 380V |
Condition | New |
Automatic Grade | Fully Automatic |
Driven Type | Electric |
Warranty | 1year |
Country of Origin | India |
Payment Terms | D/A |
Preferred Buyer From
Location | Worldwide |
Bajaj Steel Provides Fully Automatic Ginning plants are most advanced in the industry where we provide Pre Cleaners, Post Cleaners, Conveying Systems, Automatic Feeding Systems, Overflow Handling, Feed Regulators and PLC’s to synchronize and control many of the processes.
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
![]() |
Preferred Buyer From
Location | Worldwide |
Features & Benefits :
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
![]() |
Preferred Buyer From
Location | Worldwide |
Features :